Then you select the mesh object in the tree, and use the mesh region tool.

This will be fast but will not cover all areas. When you create the mesh, at first, use a coarse but reasonable cell size, in your case 0.25 - 1 mm should work. The whole model does not need to be meshed finely. Thank´s for helping me.ģD_Test_Parameter_without_mesh.FCStd (55.69 KiB) Downloaded 52 times 3D_Test_EN.png (36.02 KiB) Viewed 2306 timesĪlso in 3D you may be able to reduce drastically your meshing time by using meshing regions. In this post we already discussed my problem:įeel free to edit my file and ask me if anything is missing or you want to know something. I generated a Dropbox link for the complete file. The file does not have a “mesh” because the file with the “mesh” is too large. > are my limits correct? I have Inlet, Inlet 1, Outlet and all other pages as 'Wall' or do I have to specify the symmetry area as such? > is it even possible that there is water pressure on the inlet and air pressure on inlet 1?

My goal is to study the distribution of pressure and speed in the nozzle and on other different nozzle models.

The outlet is the small diameter at the end (outlet). During normal water jet cutting, abrasive (sand) is sucked in there. The mixing chamber (Inlet 1) has an ambient pressure of 1 bar (air), which creates a negative pressure. I´m a german student and currently dealing with the simulation of water jet cutting.

Cfdof freecad